Pearls  drops
Of the  metal beads
From the fancy chain
from the extension chain
A clasp  carabiner
Of the  3x4mm oval rings
0.4mm soft brass wire

To start, cut a piece of soft brass wire about 10cm long.

Then, thread 7 drop beads alternating with 6 metal spinning top beads.

For a small wrist  between 15cm and 17cm, cut 2 pieces of fancy chain of 4.5cm (i.e. 4 fancy links)

For a wrist between 17cm and 19cm, add a fancy link on each side.

Please note, the extension chain will allow you to perfectly adjust the bracelet to your size.

Connect the pearl thread to the chain:

Form a small loop with round nose pliers about 3cm from the end of the brass wire. Insert the chain into the brass wire so that it sits in the loop created.

The smaller your loop (while keeping enough space for the chain to move) the more discreet and harmonious your assembly will be. The goal is to forget the means of attachment to highlight the pearl threading and the continuity with the chain.

Then with flat pliers, hold the loop so that it remains closed and in its shape. Then wrap the brass wire at the base of the loop by making 3 tight turns. Cut the excess wire flush and tuck it in with flat pliers to prevent it from snagging.

Do the same with the other end of the brass wire and the other end of the chain.

For added comfort, twist the bead string slightly to give it a curved shape that will follow the wrist.

Finally, cut an extension chain of about 3cm then connect it to the chain with an oval ring.

On the other side, connect the lobster clasp with an oval ring.

And there you have it! Beautiful creation!