| This is THE trend of summer 2023 Body jewelry or body chains can be worn in different ways. Here we worked it like a necklace that goes back on the hips from the back of the back. A minimalist version that highlights a pendant set surrounded by cowrie pendants for the beach spirit with a confetti chain that captures the sun's rays and lights up the outfit. This jewel is very simple to make and can be worn with all types of outfits. Under a short t-shirt to reveal the chain that falls on the hips, with a 2-piece swimsuit, with a slightly low-cut shirt... Follow all our explanations below and have a great summer!  |
|---|
| For this achievement you need: | ||||
|
| ||||
| Some explanations: | ||||
| | The measurements given here were made for the model, you will have to take your measurements as you go along, on yourself, throughout the assembly to have the right size that suits you. The jewel must be comfortable to wear, neither too loose nor too tight. To begin, assemble the connector set in the center of the 2 cowrie pendants with 4mm rings. Afterwards Cut 2 pieces of chain of about 36cm each. Test the length on yourself so that the cowrie/setting assembly falls just below the chest. Now, slightly widen the links at the ends of the chains with a reamer. This will make it easier to pass the rings through. Mount a 3x2.4mm oval ring on each chain and close it. Then connect these rings to the cowrie pendant with 4mm rings. As in the photo below.
On the top of the chains, connect the clasp and the extension chain with 3x2.4mm oval rings and close them properly. The upper part of the jewel, which is placed as a necklace, is now finished! For the bottom, put on the necklace and determine the length of the chain that will fall on the top of the hips. Please note that you must be able to put your jewelry on this chain, either from the top or from the bottom. So don't take a measurement that is too tight! Placing a clasp on it would not be veryaesthetic ! Here we took a 95cm chain. Which leaves room to put it on without forcing and gives a beautiful soft fall on the body. Once worn, the jewel does not create tension and is forgotten. To connect this chain, widen the links at the ends then mount 3x2.4mm oval rings at the 2 ends. Now connect the rings at the ends with a 4mm ring directly on the bottom cowrie. And there you have it! Beautiful creation!
And there you have it! Beautiful achievement! | |||
Vous aimez les bijoux et les belles matières ?
Inscrivez-vous à notre Newsletter et restez informé de nos nouveautés, les derniers Tutoriels, les offres et promotions..
a chain link confetti
