Variation around striped agate

With its soft, spring-like hues, the green striped agate inspired us to create 4 earrings for the arrival of sunny days. Minimalist or more elaborate, these earrings are very easy to make!
For this achievement you need:
Earrings shape of your choice (BO studs, creoles, BO for 7mm cabochons) Ethnic pendants 7mm cabochons 4mm cabochons Pendant supports for 4mm cabochons Glue 3mm rings Of the pendants natural stone rounds From the chain 0.4mm brass wire

With its soft, spring-like hues, the green striped agate inspired us to create 4 earrings for the arrival of sunny days.

Minimalist or more elaborate, these earrings are very easy to make!

For this achievement you need:

Earrings shape of your choice (BO studs, creoles, BO for 7mm cabochons)
Ethnic pendants
7mm cabochons
4mm cabochons
Pendant supports for 4mm cabochons
Glue
3mm rings
Of the pendants natural stone rounds
From the chain
0.4mm brass wire

Assembly guide:

For Oval Curls:

Start by gluing the 4mm cabochons into the supports.

Then connect the pendants to the oval earrings with 3mm rings.

For the Curls Ethnic:

Start by gluing the 7mm cabochons into the earring holders.

Then open the ring located under the earrings to connect the pendants.

For the Curls Creoles:

Simply open the creole and thread the natural stone pendant.

For the Curls hanging chains:

Start by cutting 2 pieces of chain of about 3cm. Widen the links with a reamer to make assembly easier.

Then connect the chains to the ball stud earrings by opening the ring located on the underside of the earring.

Then cut a brass wire and pass it through the last link of the chain, keeping a piece of wire of about 5cm.

Make a mini loop then wrap the wire around the bottom of the loop 2 times. Cut off the excess wire.

With the remaining wire, thread the pendant then wrap the wire 2 times under the loop. The wire will cover the first one which was used to connect the chain.

Cut the excess wire flush.

And there you have it! Beautiful creation!